Fully automatic water softener is a kind of operation and regeneration operation process fully automatic control of the ion exchange water softener, the use ofsodium-typecation exchange resin to remove calcium and magnesium ions in the water, reduce the hardness of raw water, in order to achieve the purpose of softening hard water, so as to avoid carbonate in pipes, containers, boilers to produce fouling phenomenon. Great savings in investment costs at the same time to ensure the smooth progress of production. It is widely used in varioussteam boilers, hot water boilers, heat exchangers,steam condensers,air conditioners,direct combustion engines and other equipment and systems in the circulating recharge water. It is also used as a leading treatment for domestic water treatment, food, electroplating, pharmaceutical, chemical, printing and dyeing, textile, electronics and other industrial water treatment, as well as a desalinationsystem. The hardness of the water produced after treatment by a single-stage or multi-stage water softenercan be greatly reduced Key features 1. High degree of automation, stable water supply conditions, long service life, automatic whole process, only regular salting, no human intervention is required. 2. High efficiency, low energy consumption, operating costs and economical. 3. The equipment is compact and reasonable, easy to operate and repair, covers a small area and saves investment. 4. Easy to use, easy to install, debug, easy to operate, control parts stable performance, can enable users to solve worries.
Work (sometimes called water production, the same below),backwashing, salt absorption(regeneration),slow flushing(replacement),fast flushing five processes. DifferentWater Softening Equipment All operations are very close, but there may be additional processes due to the different or controlled needs of the actual process. Any softening water equipment based on sodium ion exchangehas been developed on the basis of these five processes(where fully automatic softening water equipmentincreases the salt water re-injectionprocess).
Basic introduction
Water softening equipmentregenerates water production that completely to the next failure, related to the working exchange capacity of the resin, the amount of resin filling, the hardness of the raw water, and the working condition of the softener. Cycle water production needs to be monitored in operation. The total amount of calcium and magnesium ions contained in water quality is called the total hardness of water, which can easily produce insoluble sediments (scale) in daily life and industrial water use process, which will bring many inconveniences to life and production, such as: high hardness cooling water will make the heat exchanger form scale, seriously hinder the water flow channel, so that the heat exchange effect is greatly reduced, and will also produce perforated corrosion damage equipment; As a boiler water, the boiler will be fouled by the heating surface, and the thermal conductivity is worse; Textile printing and dyeing will cause the fabric spots, affect the aesthetics and quality of products and so on. The softener works by using the exchange function of the ion exchange resin in the base group, removing the hardness components such as Ca2 plus, Mg2 plus plasma replacement in the water body, in order to achieve the purpose of hard water softening, so that the subsequent pipes and equipment internal reduction of scale caused by the harm, extend the service life of the equipment. The water quality hardness after treatment by JPYSF single- or multi-stage softener ≤ 0.02mmol/L. Softener failure requires sodium chloride to regenerate, which is extremely convenient to operate
Audited Supplier 
){kind=link}