Product features
Features of steam heating muffler:
Steam heating muffler is a special muffler which is installed in the pool, sink, water tank and water tank with high temperature and high pressure steam heating water and connected with the pipe outlet of high pressure and high temperature steam to eliminate the strong noise and vibration when steam and water are mixed. It can also be called: steam heating water muffler, steam inlet muffler, hot water tank muffler, hot water tank steam muffler.
Advantages: the traditional steam heating uses the heat energy of steam through conduction. The utilization rate of heat energy is very low. The utilization rate is only 30% of the heat energy. If the steam is directly injected into cold water, the utilization rate of heat energy of steam can reach more than 96%. At the same time, the condensed water converted from steam is also fully utilized. It not only meets the environmental protection requirements of energy conservation and emission reduction advocated by the state, but also creates good economic benefits for users. It is the heating mode most users choose. However, the difficulty in this way lies in the harm caused by the noise and vibration. The steam heating muffler based on the theory of fluid dynamic acoustics adopts the scientific theory as the guidance, which restricts the generation of noise at the root, changes the difference between the movement mode of air flow and water flow, reduces the movement resistance of unstable two-state fluid, and makes the release of steam more smoothly, and the mixing of steam and water more quickly and evenly.
matters needing attention:
The steam pipe leading into the water tank shall be fixed without looseness.
A check valve is installed on the steam pipe near the water source to prevent water backflow accident.
If there are impurities in the steam pipe (new pipe, long used pipe), the filter must be installed
Product application
Scope of application:
Steam heating muffler is generally suitable for steam water heating, such as: bathhouse, hotel, water tank, etc
After steam enters into the water, it will make the sound of bubbling and vibration. The steam heating muffler solves this problem very well. The connecting pipe is connected with the steam pipe, and there are small inclined holes distributed evenly around the connecting pipe. After steam enters into the inclined hole, it ejects with the cold water in the cylinder to form a swirling flow. In this way, the water in the cylinder is continuously cold and hot alternately, So as to eliminate noise and feed water heating, also known as heater
Product parameters:
| Order number |
HC-N25 |
Processing and customization |
yes |
number |
CHHC-N25 |
| brand |
HC FLOURISH |
model |
CLP |
power |
0(kVA) |
| temperature range |
0~150 |
Dimensions |
Ф0.168~0.219(m) |
weight |
10(kg) |
| purpose |
Immersion anechoic heating of water tank |
working voltage |
0 |
insulation resistance |
0 |
| insulation resistance |
0 |
Continuous service life |
Refer to the instruction manual |
Heater type |
Steam water heater |
Audited Supplier 
){kind=link}