Plastic Chain Flight Scraper / Collector for Waste Water Treatment

• Customization: Available
• After-sales Service: Online Service
• Warranty: 1year
• Model NO.: FL
• Method: Combined Treatment
• Usage: Industrial, Home, Agriculture, Hospital
• Application: Wastewater Treatment
• Function: Chain Scraper
• Transport Package: Bulk or Plywood Case Packing
• Specification: Customized
• Trademark: FL
• Origin: China
• HS Code: 8413709910
• Production Capacity: 100 Sets/Month

Product Description

Product Description

Product Introduction

The chain plate oil scraper and mud scraper consists of three parts: the transmission part, the body part, and the track part
Position of the planetary cycloidal pinwheel reducer for tensioning the transmission chain of the transmission part
To achieve this, increase the distance.
One of the four main shafts in the body is the active shaft, and the transmission distance is determined by it
Input, the other three are all supporting shafts, and the shafts themselves do not rotate or bear torque
The traction chain is slip guided on top and supported by two movable shafts near the bottom of the pool
On the bearing, the tension of the chain is adjusted by adjusting the screw rod, and a large amount of adjustment relies on dismantling or
Add chain links.

Main Purpose

The non-metallic chain scraper can be used in various new and old sedimentation tanks, including primary sedimentation tanks, secondary sedimentation tanks, double-layer sedimentation tanks, inclined plate sedimentation tanks, and oil-water separation tanks. The maximum pool width is 10 meters, and the pool length is less than
100 meters. The mud scraper can remove both sludge and sediment at the bottom of the pool, as well as floating slag on the water surface. It is suitable for urban sewage, industrial wastewater, and water treatment.

Two parallel closed traction chains of the chain plate oil scraper and mud scraper drive multiple scrapers in sequence
Slowly move, scrape and sweep the liquid layer on the surface of the oil separation tank and the settling mud layer at the bottom of the tank, and remove the pollutants floating on the liquid surface
The oil is gradually scraped from the inlet end to the outlet end and discharged through the oil collection pipe, and the settled sludge at the bottom of the pool is discharged from the outlet
The water end is gradually pushed and scraped into the mud collection pit at the inlet end, and then discharged through the discharge valve.

Outline Installation Diagram

Adantages&Features

Rectangular design makes the layout more reasonable and space utilization higher. ·The scraper has a large number of blocks, strong scraping ability, slow moving speed, and minimal disturbance to sewage, Beneficial for sedimentation of mud and sand. ·The main components are made of corrosion-resistant components, which are lightweight, easy to install, and user-friendly Long lifespan. ·There are no heavy structural components or supporting parts in the system, resulting in low energy consumption and maintenance costs for all systems. It can also serve as a skimmer without the need for an additional mechanism. Energy saving, plastic components are lightweight and easy to move, with low power consumption, generally 0.25-0.55KW. The idler (guide wheel) is adjustable and can be calibrated. The length between chains can also be determined based on Chain pitch adjustment. There are chain wheel motion monitoring, scraper monitoring, overload protection device, and signal feedback Go to the control room.

Widely applicable to various scenarios

Scraping and suction mud machine is suitable for the diameter of water plants or sewage treatment plants in water supply and drainage engineering
Sludge scraping and discharge in radial flow (circular) sedimentation tanks generally not exceeding 20m
Except. Scraper suction mud machine can be applied to industries such as urban, chemical, textile, metallurgy, etc
In sewage treatment projects. Its structure is reasonable, easy to operate and maintain, and it is a relatively reasonable one
The desired sewage treatment project supporting facilities.

Ordering instructions

According to the application scenario and process requirements, indicate the model specifications, pool depth, pool length, slope, scraper and other parameters. If not indicated, the scraper height should be 200, and the rest should be supplied according to the recommended values.
The electrical control box, oil collection pipe (see relevant sections), and embedded accessories should be ordered separately.
·Changes in parameters such as pool bottom slope, pool length, pool depth, and sludge density, as well as the need for supporting equipment for multiple symmetrical arrangements, can be requested. Additional information can be requested and orders can be discussed.