Supply China High Efficiency Rotary Filter for Waste Water Treatment

• Customization: Available
• After-sales Service: Long Time
• Warranty: 12months
• Model NO.: hc
• Method: Physical Treatment
• Usage: Industrial, Home, Agriculture, Hospital
• Rotary Filter: Water Purifier
• Transport Package: Wooden Case
• Trademark: HC FLOURISH
• Origin: Made in China
• HS Code: 8421219990
• Production Capacity: 1000

Product Description

Fiber turntable filters are mainly used for cooling circulating water treatment and reuse after deep treatment of wastewater. As cooling water, circulating water filtration after reuse: water quality SS ≤ 80mg/L below, water quality SS ≤ 10mg/L. For deep treatment of sewage, set in conventional activated sludge method, delay aeration method, SBR system, oxidation ditch system, drip filter system, oxidation pond system, can be used in the following areas:(1) Removal of total suspended solids (2) Phosphorus can be removed in combination with additives (3) Heavy metals can be removed. Filter cloth turntable filter is used to filter the active sludge final sink out of the water, design water quality: water SS: 30mg/L (can withstand 80-100mg/L), water SS ≤5mg/L, turbidity ≤2 NTU, the general water turbidity in about 1.

Features of the filter turntable filter compared to conventional filters:
(1) The water quality is good and stable. Filter cloth turntable filter is the use of filter outsourced filter cloth to replace the traditional filter tank sand filter material, filter cloth aperture is very small, can intercept particle size of several microns (m) of small particles, so the water quality and water stability are better than the particle filter. And the conventional filter pool before flushing due to penetration problems poor water quality, after flushing will be due to the residual cleaning water in the filter layer has an impact on the water. In addition, the amount of water filtered also varies with resistance.
(2) The design is novel and resistant to impact loads. The filter cloth turntable filter is equivalent to the combination of filter and sedimentation pool, and has the function of draining mud. Large particles of sludge precipitate directly to the bottom of the bucket-shaped pool and do not clog the filter cloth, i.e. unlike ordinary filters: all suspensions (SS) are filtered. Therefore, the filtration cycle is long, the cleaning interval is long, and the hydraulic load and sludge load can be far greater than the conventional sand filter, suspension (SS) load is equivalent to 1.5 times the ordinary sand filter, the filter speed is 50% higher than the ordinary filter tank. Therefore, the filter cloth turntable filter is more resistant to high suspension concentration and the impact of large particulate suspension.
(3) The equipment is simple and compact, the ancillary equipment is less, and the investment of the whole filtration system is low. The filter cloth turntable filter can be filtered continuously when cleaning. The sand filter can not be continuously filtered when backfilling, in order to ensure continuity, it is necessary to set up an intermediate reservoir in front of the sand filter tank or use multiple filters to work alternately. The filter cloth turntable filter uses small water pump negative pressure pumping filter water automatically cleaned, eliminating the need for many traditional filter pools backwashing pools, water towers and so on. Traditional filter because of the strength of back-flushing, air and water backflushing not only need high-power pumps, blowers, but also gas and water two sets of large diameter tube valve system. The whole system is numeroa and complex, and the investment is high. Automatic control systems are extremely large and complex.
(4) The idle rate of the equipment is low, and the total installed power is low. Because the filter cloth is thin, very easy to flush clean, cleaning efficiency is high, cleaning, cleaning filter area is only equivalent to 1% of the entire filter area. Cleaning is characterized by frequent but short cleaning duration (1 time/60-120 minutes, 1 minute/time). The overall amount of water washed is also less. The traditional filter tank gas and water back-flushing pump and blower equipment, automatic valves large and many, high power, and high idle rate.
(5) The operation is automated, so the operation and maintenance is simple and convenient. The filtration process is controlled by a computer and the interval time and process duration of the negative pressure suction cleaning process and the mud removal process can be adjusted. There is basically no need for dedicated maintenance and management. The filter cloth turntable filter has a small amount of access. Filter cloth turntable filter machinery and equipment less, pump and motor intermittent operation, filter cloth wear is smaller, filter cloth is easy to replace, if for some reason caused by the filter cloth blockage, can easily replace the filter cloth. For sand filters, if the filter is blocked, a lot of cleaning is required. And sand filter replacement is very difficult.
(6) The head loss is much smaller than the sand filter. The filter turntable filter is generally 0.2m, while the head loss of the sand filter is generally more than 1.5m. The head loss of sand filtration tank is higher than 5m, the energy loss is large, and the operating cost is increased.
(7) The footprint is much smaller than that of other filters. Because of the vertical hollow tube design of the filter plate, the small footprint can guarantee a large filtration area, thereby reducing the pool capacity, reducing the amount of material and earthmoving, significantly reducing the cost of the project. Daily treatment of 10,000 tons of filter tank, covers an area of no more than 20 square meters, height of 3.3m. For technological transformation, we can solve the difficulty of not 40% space.
(8) The filter cloth turntable filter is easier to install than the particle filter. Once pipe fittings and electrical equipment are connected on site, they can be put into use. The particle filter often requires filter installation.
(9) Short design cycle and construction cycle. Filter cloth turntable filter overall equipment, can be shipped as a whole, design and construction is convenient and fast;
(10) Low endurance requirements for ground bases and low investment in equipment foundations.
Especially suitable for the upgrading of the sewage treatment plant already built, can make the water from level B to level A

 FLWLN type internal water micro filter (rotary micro filter)
1, Overview and working principle
The internal inlet microfiltration machine, also known as rotary microfiltration machine, is suitable for solid-liquid separation in industrial wastewater. It can remove the dirt with suspended particles greater than 0.2mm. The sewage is smoothly and evenly distributed into the rotating mesh drum from the buffer inlet. Through the rotation of the spiral between the mesh drum and the slag guide on the inner wall, the intercepted dirt is discharged through the other end, and the filtered water is discharged from the gap of the mesh drum.
2, Characteristics
1. Distribute water evenly and increase the treatment capacity
2. Chain transmission is adopted, with high transmission efficiency
3. Anti clogging filter screen with backwashing device
4. There are anti overflow plates on both sides to prevent sewage splashing
3, Main technical parameters

Parameter model	Mesh drum diameter(mm)	Mesh size(mm)	Removal rate		Outline area(mm)
			Particle size>0.75mm	Particle size>0.37mm
FLWLN-600	600	0.2-2	95%	55%	2450×1000×960
FLWLN-800	800		95%	55%	3000×1200×1200
FLWLN-1000	1000		95%	55%	3400×1350×1250
FLWLN-1200	1200		95%	55%	3500×1850×1450
FLWLN-1500	1500		95%	55%	3650×1800×1880

 

brand
Flourish
The applicable object
All kinds of sewage
The type of filter material
Fiber filter cloth
The type of filter
Precision filtration
The body material
Carbon steel, stainless steel
Effectively filter the area
Customization on demand
Form factor
Customization on demand
The weight of the device
Customization on demand
Land for sale
nationwide