Tanks for Waste Water Treatment Plant

• Customization: Available
• After-sales Service: Long Time
• Warranty: Long Time
• Model NO.: FL
• Method: Physical Treatment
• Usage: Industrial, Home, Agriculture, Hospital
• Trademark: FL
• Origin: China
• HS Code: 9202100091

Product Description

 

Product Description

 

The formation and separation mechanism of small oil droplets, the structural type of mechanical centrifugal equipment, and the use of fluid dynamics mechanism based on the density difference between oil and water, combined with advanced oil-water separation technology, have successfully launched the patented technology product of FLGZ-XX tank in tank (with built-in rotary liquid separation and floating oil automatic collection and discharge combination device)
>>>Equipment Overview
The oil discharge combination device for hydraulic cyclone separation and automatic collection of floating oil is commonly known as the "tank in tank", which integrates sewage regulation, homogenization, and oil removal functions. Oil containing sewage uses the density difference between oil, water, and sludge to rotate in the multi tube bundle hydraulic cyclone separator to generate different centrifugal forces. Under the action of centrifugal force, the oil, water, and sludge are separated into three phases, and the separated oil floats to the top of the inner tank. The oil is discharged to the external dirty oil collection tank by the automatic oil skimming device set in the inner tank; The solid impurities that settle down are discharged through water pressure in the conical bucket of the settling zone; The separated sewage enters the outer tank through siphon pipes evenly distributed around it, playing a role in homogenization, buffering, and oil removal.
>>>Technical features
1. High oil removal efficiency, the FLGZ-XX tank (oil containing wastewater homogenization regulating tank) is designed to have an oil content of less than 150mg/L in the effluent, but the actual oil content is lower than 150mg/L
It can be reduced to below 100mg/L. (Excluding emulsified oil and dissolved oil).
2. During oil collection and sludge discharge operations, normal operation can be maintained with high facility utilization.
3. The high purity and low water content of the collected dirty oil improve the recovery and utilization rate of the dirty oil in the sewage treatment system.
4. Sewage has a wide adaptability range and is not affected by changes in the oil content of the incoming water, resulting in stable effluent quality.
5. The equipment is a sealed container with no odor leakage or secondary pollution, suitable for industrial production management.
6. It can operate reliably and continuously for a long time under single tank conditions.
>>>Technical parameters
1) Sewage inlet pressure: 0.1-0.3MPa
2) Wastewater treatment capacity: XXm3/h
3) Inlet flow rate: 1-2.5m/s
4) Sedimentation velocity of sludge in the tank: 0.4-1.2mm/s
5) Inlet oil content:<20000mg/L
6) Oil content in effluent: < 200mg/L
7) Working temperature: 40 ºC
8) Heat tracing method: water vapor (0.4MPa)
9) Adjust tank specifications: Design and determine based on site conditions and dwell time. (Corrosion prevention of carbon steel).
10) Medium tank specifications: determined based on the outer tank specifications and processing capacity (carbon steel anti-corrosion).
>>>Product specifications, main parameters, and dimensions

	FLGZ-XXType can in can
Hourly processing capacity(m³)	10		20		50		100		150		200	250	500	1000
Oil content in discharged water	<150mg/l
Inlet working pressure of the device	>0.1MPa
Oil discharge method force	Automatic oil skimming and draining
Product operation mode	Long term unmanned operation, automatic and reliable continuous operation
Product operating temperature	5ºC-80ºC
Inner tank diameter(mm)	2000	2500		3500		4500		5000		6000		6500	7500	10000
Inner tank weight(kg)	1500	2430		3700		9600		14000		16000		19000	26000	37000