FLSY shaftless screw conveyor with compactor purpose:
The utility model is an integral device of the sewage rack and the screw conveyor, which is convenient to put the slag into the sewage disposal tank after being squeezed out of the sewage grid, and it is convenient to put it into the sewage disposal tank without the sewage grid.
Working principle and structure:
The shaftless screw conveying press integrated machine is composed of shaftless screw body, wear-resistant lining plate, spiral groove, spraying device, hopper, frame, extrusion conveying pipe and driving device. The screw conveying and pressing integrated machine adopts the form of shaftless screw structure. Its main working principle is that when the grid slag is input from the feed inlet, the driving device drives the spiral body to rotate to transport the slag and sewage forward, and the materials enter the extrusion conveying pipe. Under the forward pushing pressure of the spiral body, the water in the slag and sewage is squeezed dry, so as to achieve the purpose of pressing dehydration and reducing the volume. After pressing, the slag falls into the garbage trolley, The spraying device can clean the slag and dirt at any time according to the user's requirements, reduce the peculiar smell, and facilitate the flushing of the spiral body and spiral groove, so as to keep the equipment clean and sanitary.
characteristic:
1. Simple structure, no bearing in extrusion section, smooth material conveying;
2. The spiral blade is made of stainless steel, with high strength and corrosion resistance;
3. Stable operation, low energy consumption, convenient installation, easy maintenance and operation;
4. Except that the inlet and outlet are open, the rest can be covered and closed, so that the materials will not overflow and reduce air pollution.
Outline diagram:
Note:
diameter of shaftless spiral = width of spiral groove - 400mm.
The spiral groove width, conveyor length, angle and inlet and outlet size can be determined by users.
The conveyor can be designed with various installation methods, such as hoisting, wall fixing, etc., and can be equipped with foot rollers.
Technical characteristics:
model
project |
FLSY-260 |
FLSY-320 |
FLSY-360 |
FLSY-400 |
| Spiral speed |
12-20r/min(Select according to the nature of transported materials and the length of conveyor) |
| Flow rate(m3/h) |
0° |
3 |
4 |
9.5 |
11 |
| 15° |
2.1 |
4.5 |
6.5 |
8.5 |
| 30° |
1.3 |
2.5 |
4.3 |
5.7 |
| Conveying length |
≤12 |
≤15 |
≤20 |
≤25 |
| Installation angle |
General design≤20°, Special order≤30° |
Audited Supplier 
Note:
){kind=link}