Supply China Automatic Mechanical Screen for Waste Water Treatment

• Customization: Available
• After-sales Service: Long Time
• Warranty: 12months
• Model NO.: FL
• Type: Waste Water Treatment
• Method: Inflow Mesh Plate Type Mechanical Screen
• Usage: Environmental Protection
• Recognized Proof: CB
• Flourish: Flourish
• Waste Water Treatment: Waste Water Treatment
• Transport Package: Polywood Case
• Specification: Customizable
• Trademark: FLOURISH
• Origin: China
• HS Code: 8421299090
• Production Capacity: 300

Product Description

Use and scope of application:
        FLGNW-type inflow stencil grille decontamination machine is a high-efficiency fine-grid decontamination equipment that combines pollution control and decontamination. Applicable to large, medium and small pump stations as fine grids to intercept and remove floating objects in the water, such as weeds, paper, cigarette butts, seeds, fibers, hair, etc. This model has a high rate of dirt capture. , can ensure the effective implementation of the follow-up treatment process.

Structure and characteristics:
        The inflow stencil grid decontamination machine is mainly composed of main components such as a drive device, a frame, a traction chain, a stencil with a lifting ladder, a flushing system, and an electronic control system. The drive motor is installed on the positive main shaft of the machine frame.
        Under the driving of the drive chain, both sides of the net plate are lifted from the bottom up to remove the dirt trapped in the length range. When reaching the upper part, the sprocket turns the steering wheel.
        Under the action of the flushing water of the flushing device on the top, the dirt discharging work is completed automatically, and the slag water is discharged into the slag collecting trough between the two side net plates and discharged from the machine by gravity.

  The drive device of the inboard flow screen grille decontamination machine is located in the upper part of the rack and is an imported brand shaft-mounted reducer. Spiral adjustment devices are installed on the front and rear sides of the rack to adjust the tightness of the transmission chain.
 

  The frame of the internal flow screen grille decontamination machine is an integral rectangular parallelepiped rigid structure assembled and welded with stainless steel sheet and steel. There is a water inlet opening at the water inlet at the lower part of the rack.
 

  The front and rear wall plates of the rack are provided with guide rails.

  The upper part of the rack is also provided with an internal slag tap and extends to the outside of the machine.

  The rack is installed in the center of the grid well, and the gap between the two sides of the rack and the grid well is the channel through which the grid filters out water. Guide baffles are arranged on both sides of the water-flooding end of the rack, which can prevent the floating garbage from passing through while diverting the water.

 

  The traction sprocket and guide device for transmission are respectively placed on the upper and lower sides of the two sides of the rack. Ladder-type stencils are made of ASTM 304 stainless steel.

  The mesh surface is a regular arrangement of small holes, with the function of passing water and intercepting dirt, and the step surfaces can retain large dirt.

  The inflow stencil grid decontamination machine has a reliable stencil flushing system.

  The medium-pressure rinsing system and the grid start and stop at the same time, effectively removing most of the contaminants retained by the stencil.

  The high-pressure flushing system removes some hard-to-remove dirt and ensures that the mesh regenerates.