High Efficiency and Reliability Customizable to Me
Applications
Waste Water Treatment Plants Industrial Waste Wate
Industry Verticals
Water and Wastewater Treatment Industrial Water Tr
Origin
China
HS Code
8421299090
Production Capacity
500
Product Description
Mixer manufacturer of regulating tank Brief description: The mixer manufacturer of regulating tank adopts cycloid pin wheel reducer with small power, low speed, large impeller diameter and wide service area. The impeller is made of polyurethane material and aluminum alloy. It has high strength and strong corrosion resistance. It not only has the function of stirring, but also has the function of pushing and creating water flow. The mixer manufacturer of regulating tank, also known as Submersible Propeller, is suitable for the propulsion and mixing of suspended solids containing sewage, thin mud, industrial process liquid, aeration tank and anaerobic tank of industrial and urban sewage treatment plants in the process flow of sewage treatment plants. The water circulation in the tank and the water flow in the nitrification, denitrification and phosphorus removal stages can be used to create water flow. According to the different process requirements of sewage treatment plant, the flow rate of mixer selection should be between 0.15-0.3/s. If the flow rate is lower than 0.15/s, the effect of plug flow mixing can not be achieved. If the flow rate is higher than 0.3m/s, the process effect will be affected and waste will be caused.
Features of mixer manufacturer of regulating tank: 1. Compact structure, small volume, light weight, simple operation and maintenance, convenient installation and maintenance, long service life. 2. The product adopts multi pole motor and direct connection structure, with low energy consumption and high efficiency; the impeller is shaped by investment casting or stamping, with high precision, large thrust, beautiful appearance and smooth structure. 3. Cycloid pin wheel reducer is adopted, with small power, low speed, large impeller diameter and wide service area. The impeller is made of polyurethane material and aluminum alloy. It has high strength and strong corrosion resistance. It not only has the function of stirring, but also has the function of pushing and creating water flow. 4. The motor winding is F-class insulation, and the protection grade is IP68. When used in the aeration system of sewage treatment plant, the energy consumption of the system can be greatly reduced, and the oxygen content can be significantly increased, which can effectively prevent precipitation. Installation precautions: 1. The guide rod or guide wire shall be vertical to the horizontal and can be corrected by plumb; 2. When the hook is used to lift the submersible mixer, the impeller end shall be tilted up by 5-10 ° from the horizontal plane 3. Through the adjustment of the chain on the lifting device, the lifting hook and the lifting center of gravity of the submersible mixer are on the same vertical line when the submersible mixer slides down along the guide rod or guide wire.
Models:
Audited Supplier 
){kind=link}