Product Description
TPU aeration belt is an efficient new type of aeration device with good aeration effect, simple cylinder and easy replacement. There are many small pores on the aeration belt, which open and aerate under a certain pressure. When not aerated, the water pressure and its own properties cause the pores to close, preventing the blockage of the aeration belt pores caused by the backflow of sewage and sludge. Aeration belt is used for oxygenation and aeration in urban sewage and various low industrial water treatment projects.
Aeration belt installation method
1. The installation method of removable and adjustable aeration;
2. Tubular aeration installation method.
1. As a replaceable and adjustable aeration belt, the commonly used specification is DN65, and the specific length is customized according to the size of the aeration tank. The thickness of the membrane tube is 04-0.6mm.
Product specification
1. As a replaceable and adjustable aeration belt, the commonly used specification is DN65, and the specific length is customized according to the size of the aeration tank. The thickness of the membrane tube is 04-0.6mm.
2. As a membrane tube for tubular gas receivers, the commonly used specification is DN65, with lengths of 550mm, 750mm, 1000mm, etc. (lengths can be customized according to requirements), and the thickness of the membrane tube is 0.6-1.0mm.
Product features
1. The aeration belt is made of TPU material, which has good tensile and tear resistance, and strong elasticity.
2. It has advantages such as acid resistance, impact resistance, aging resistance, oil resistance, proper bending resistance, and even gas distribution, making it easy to package and transport
3. Due to the relatively thin wall thickness of the membrane tube, the aeration resistance loss is greatly reduced, which not only achieves energy efficiency but also has a high oxygen utilization rate.
4. The use of a pull-out and adjustable aeration installation method allows for the replacement of the aeration belt without stopping the machine or emptying the pool, making installation management and replacement more convenient.
5. The displacement type installation is 15-20cm apart, with a ventilation rate of 0.5-2.0m/mh. It is used as a membrane tube for tubular aerators, with a ventilation rate of 2.0-6.0m/mh.
Technical parameters
Tracheal diameter
(mm) |
Water depth
(m) |
Clothing surface thickness (m/m) |
Ventilation volume
(m/m-h) |
Utilization rate (%) |
Stroke bubble diameter
(mm) |
Resistance loss
(Pa) |
Pore density (number/m) |
notes |
| 65 |
5.0 |
0.5-1.5 |
2.0-5.0 |
35 |
1.0-3.0 |
3500 |
12000 |
Tubular installation |
| 65 |
5.0 |
0.2-0.5 |
0.5-2.0 |
40 |
0.5-2.0 |
3000 |
8000 |
Pull and replace installation1200 |
Audited Supplier 
){kind=link}