7,
Product Description
Product introduction
The sewage treatment series products adopt modified polyvinylidene fluoride (PVDF) and are made into a hollow fiber ultrafiltration membrane with an overall asymmetric structure through an innovative VNIPS membrane process, with a pore size of 0.025 μ m. The surface pore size of the membrane is small, the opening rate is high, and the pore size is uniform.
Product features
1,High separation accuracy.
2,High tensile strength.
3,Stable flux high.
4,Low wire breakage rate.
5,Strong anti pollution ability.
6,Long service life.
7,High uniformity of aperture.
Product advantages
1. High operating flux
Reasonable filling density improves water permeability, which is 1.5 times that of ordinary ultrafiltration membranes.
1.5 times the size of the ultrafiltration membrane.
2. Low operating energy consumption
The high stable flux of the membrane effectively reduces the operating pressure of the inlet water, thereby reducing the energy consumption of the raw water pump.
3,Low drug consumption during operation
The ultra-low pressure operation characteristics reduce the risk of membrane fouling, and the combination of gas washing and chemical washing reduces the dosage of chemicals.
4,Low cleaning frequency
Strong anti pollution performance, no need for frequent cleaning, prolonging service life.
Parameters
| product spe ifications |
Type |
FLMP-ZU0880-B |
FLMP-ZU0880-A |
FLMP-ZU0860-B |
FLMP-ZU0860-A |
FLMP-ZU0660 |
FLMP-ZU0440 |
| size(mm) |
Φ225x2360 |
Φ225x2283 |
Φ225x1860 |
Φ225x1783 |
Φ160x1775 |
Φ90x1120 |
| Net length of membrane filament(mm) |
2000 |
2000 |
1500 |
1500 |
1500 |
1000 |
| Filtration(μm) |
0.025 |
| Membrane area(m²) |
75 |
75 |
50 |
50 |
40 |
8 |
| Component wet weight(kg) |
65 |
65 |
53 |
53 |
35 |
10 |
| Water inlet |
DN50 |
DN50 |
DN50 |
DN50 |
DN40 |
DN32 |
| Water outlet |
DN50 |
DN50 |
DN50 |
DN50 |
DN40 |
DN32 |
| Concentrated water outlet |
DN50 |
DN50 |
DN50 |
DN50 |
DN32/40 |
DN32 |
| Descrip tion |
Membrane silk material |
Polyvinylidene fluoride(PVDF) |
| Membrane shell material |
Cyclochloroethylene(UPVC) |
| Sealing material |
Epoxy resin |
| Operating made |
Outside-in |
| Save as |
Wet storage |
| Applicability |
Flux(LMH) |
40-120 |
| Operation mode |
Full flow filtration /cross flow filtration |
| Operating pH range |
2-12 |
| Operating temperature(ºC) |
1-40 |
| Maximum inlet turbidity(NTU) |
300 |
| Maximum inlet water pressure(MPa) |
0.6 |
| Maximum transmembrane pressure difference(MPa) |
0.2 |
| Maximum backwash pressure(MPa) |
0.25 |
| Maximum NaCIO resistance(mg/L) |
5000 |
| Performance |
Expected turbidity of produced water(NTU) |
≤0.1 |
| Expected water production SDI15 |
≤2.5 |
Provide customized membrane component services
Application area
Hotels/restaurants, sanatoriums/hospitals, factories/mines, residential areas/townships, seaports/docks, airports/stations, petroleum/chemical industries, aquaculture wastewater, slaughterhouse wastewater, municipal wastewater treatment, amusement parks/water parks, various industrial wastewater.
Audited Supplier 
){kind=link}