Self-cleaning brush filter
Self-cleaning brush filter for Environmental water treatment
Self-cleaning brush filter for iron and steel industry
Self-cleaning brush filter for metallurgy industry
Self-cleaning brush filter for chemical industry
Self-cleaning brush filter for plastics industry
Self-cleaning brush filter for agriculture irrigation
Industrial filters
Water filters
High purity filters
Selfcleaniny filters
Self-cleaning brush filter Y- type, I -type
1\Self-cleaning brush for the automatic self-cleaning filter for electrical equipment, reduce maintenance costs. Safety and protection of downstream equipment.
2\Self-cleaning filter brush with the most sophisticated space-saving design, linear structure.
3\Self-cleaning filter brush with high accuracy, high intensity wedge filter, filter accuracy can be 100 to 3000 microns.
4\Self-cleaning filter brush cleaning is simple, stainless steel brush.
5\Self-cleaning brush filter backwashing continuously flow when.
6\Self-cleaning brush filter backwash water, very small, less than 1% of the total flow.
7\Self-cleaning brush filter applied to high-volume, high-polluting occasions.
Applications
Environmental water treatment, iron and steel industry, metallurgy industry, chemical industry, plastics industry, agriculture irrigation
Work
Filter:
Fluid flows from imports from the filter cartridge within a small wedge-shaped gap in the outflow of impurity particles can easily be intercepted off the surface of impurity particles accumulate in the filter, it will create pressure.
Cleaning:
When the pressure difference to 0.5kg/cm2, the filter backwash system will start automatically. Operation by setting the body on the pressure controller, electric motor-driven discharge valve and a stainless steel cleaning brush can be rotated, impurity particles can easily be steel brush down, and then by the sewage discharge valve, anti-washing time of 15 sec, when the continued flow of anti-wash.
Control:
When the pressure difference through the filter to a predetermined value, the differential pressure controller will send a signal to the PLC controller, the controller will start the motor and drain valve to begin cleansing, such as failure, there had been pressure drop, filter has been in a clean state and an alarm signal, the duration of anti-laundering operation was controlled within 5 minutes.
Technical parameters
| Maximum flow |
1000m 3 |
According to process requirements and design |
| Minimum working pressure |
0.2Mpa |
| Maximum working pressure |
1.6Mpa |
| Intel~outel |
50mm~400mm |
| Maximum working temperature |
80 |
| Filter Precision |
100~3000μm |
| Filter Material |
304\316or316L |
| Equipment Material |
304\316or316L |
| Motor Power |
0.37~0.75KW |
| Supply voltage |
380V\50Hz |
| Backwash flow |
Less than 1% of the total |
| Backwash time |
15s |
| Backwash Pressure |
0.5Kg/cm 2 |
Nominal diameter
(mm) |
Installation dimensions(mm) |
Discharge valve
(mm) |
Reference flow
(m 3 /h) |
| L |
H |
| 50 |
600 |
400 |
20 |
25 |
| 65 |
600 |
450 |
20 |
30 |
| 80 |
700 |
500 |
20 |
50 |
| 100 |
800 |
550 |
25 |
80 |
| 125 |
900 |
600 |
25 |
125 |
| 150 |
950 |
650 |
25 |
150 |
| 200 |
1050 |
650 |
32 |
200 |
| 250 |
1250 |
750 |
40 |
380 |
| 300 |
1500 |
1020 |
40 |
500 |
| 350 |
1800 |
1240 |
50 |
800 |
| 400 |
1800 |
1310 |
50 |
1000 |
|
Audited Supplier 
){kind=link}
){kind=link}