Supply Peripheral Drive Mud Scraper for Waste Water Treatment in Textile

• After-sales Service: Long Time
• Warranty: 12 Months
• Type: Sludge Scraper
• Usage: Industrial, Enviroemntal Industry
• Mark: Zbg8-20;Zbg20-28 Zbg30-40 Zbg45-50 Zbg60-80
• Peripheral Velocity(M/Min): 1~2
• Model NO.: ZBG8-20; ZBG20-28 ZBG30-40 ZBG45-50 ZBG60-80
• Driving Power(Kw): 0.55X2~1.5X2
• Transport Package: Sea Worthy
• Specification: customizable
• Trademark: FLOURISH
• Origin: Made in China
• HS Code: 8421299090
• Production Capacity: 500

Product Description

Half bridge peripheral drive mud scraper

Product introduction
The half bridge type peripheral drive mud scraper is used in the round sedimentation tank of the sewage treatment plant to scrape and collect the sludge deposited on the bottom of the tank to the mud pit for sludge return and concentration dehydration; and the eating scum is skimmed to the scum hopper and discharged out of the tank through the scum funnel for further treatment.
Product features:
1. Simple structure and light weight: due to the use of truss structure and only one set of driving structure, the weight is greatly reduced.
2. The maintenance is simple and convenient, and the operation cost is low.
3. The new transmission mechanism and reducer adopt shaft mounted type with high efficiency. The walking wheel adopts standard solid tire, which is compact in structure and easy to install.
4. The electrical components are outdoor type, safe and reliable, and can be controlled randomly or remotely.
5. According to the needs of users, the walking wheel can be rubber wheel, nylon wheel and steel wheel. It can be manufactured according to the specific size of users. Parts in contact with water can also be made of stainless steel.
 
Structure:
The half bridge type peripheral drive mud scraper is composed of working bridge, small mud scraper, steady flow tube, mud scraper truss, overflow device, driving mechanism of central support, slag scraper, collector and electric control box.
Driven by the surrounding driving mechanism, the working bridge rotates around the central support installed on the central buttress of the pool. During the rotation of a group of mud scraper installed on the working bridge, the sludge deposited at the bottom of the pool is scraped to the sludge pit in the center of the pool. At the same time, the scum on the liquid surface is concentrated in the shrinking area formed by the scum scraper and the surrounding slag retaining weir, and there are scum scraper scraped to the scum collecting hopper and discharged to the outside of the pond.
 
Technical parameters:

Model	Pool diameter  D( mm)	Peripheral velocity(m/min)	Driving power(Kw)
ZBG8-20	8~20	1~2	0.55×2
ZBG20-28	20~28		0.75×2
ZBG30-40	30~40		0.75×2
ZBG45-50	45~55		1.1×2
ZBG60-80	60~80		1.5×2