Auto Self-Cleaning Filter System for Waste Water Treatment

• After-sales Service: Long Time
• Warranty: 12 Months
• Type: Industry Filter
• Method: Physical Treatment
• Usage: Industrial, Agriculture
• Processing Methods: Physics and Chemistry
• Model NO.: FLASC200~FLASC2000
• Pullution Sources: Solid Waste Processing
• Transport Package: Seawothy Packing
• Specification: 100---4200m3/h
• Trademark: Flourish
• Origin: China
• HS Code: 8421219909
• Production Capacity: 6000

Product Description

Automatic self-cleaning filter
The automatic self cleaning filter Working principle
The automatic self cleaning filter is consisted of filter vessel, stainless steel filter screen, differential pressure switch, time-delay device and pneumatic drain valve. The liquid flows into vessel, filtered by the filter screen and flow out from outlet. So the impurities are intercepted in the filter screen. When the differential pressure reaches the pre-determined value, the filter automatically start the self-cleaning process and the impurities will go out from the drain valve.
Automatic Controlling
First, make the control system to automatic mode.
Second, when the pressure difference switch the reaches index value, the filter will start self-cleaning automatically and discharge. The time of cleaning and discharging are set by the control system.
Finally, when the time reaches to the index value, the filter will stop cleaning and continue the filtration process.
Manual Controlling
First, make the control system to manual mode.
Second, when you press the discharge button, the filter will start self-cleaning and discharge.
Finally, loosening the discharge button, the filter will stop cleaning and continue the filtration process.
Product Design Features
1. Suitable for the high flow rate, low-viscosity fluid filtration. The max capacity of a single system is up to 3500m3/h.
2. The filter has the ability of retrieving the instable flow rate and adjusting the time of cleaning without manual operation.
3. Filter screen is easy to be cleaned and it is not consumption part.
4. When the fitler is cleaning the filter screen, the inflow can keep working at the same time.
5. The time of cleaning process is so short that it will save raw material and power. It is very environmental.
6. Compact construct design, small floor area. Easy installation and moving flexiblly.
7. The filter has less wearing parts, no consumption parts and much lower operation and maintenance cost.
8. With extensive application filed, the filter could meet different requirements of various raw water.
9. With larger filtration area and little loss of pressure, more impurities can be filtered.
10. Every parameter can be adjusted according to the actual working condition.
Application range
1. Recycling water in various industries, such as, steel factory, power station, chemical system, electronic, paper manufacture and so on.
2. Resident water supply system
3. Cooling water, condensed water and cooling tower recycling water system
4. Central air conditioner system
5. Heat exchanger system
6. Air conditioner, heating, boiler heat recycling water system
7. Waste water treatment, sewage water treatment third filtration, reduce the cost of fine filtration process.
8. Prefiltration and secondary filter for lubricating oil, scrub solution, chemical solvents and other suspending liquid.
9. Other filtration application, especially suit for 24 hours working condition.

 

Model	Max Flow(m3/h)	Max pressure	Design Temp (degree)	Pipe Size	Material
FLASC200	80	150 psi	80	DN100	304/316
FLASC 300	150	150 psi	80	DN125	304/316
FLASC 400	250	150 psi	80	DN200	304/316
FLASC 500	350	150 psi	80	DN250	304/316
FLASC 600	700	150 psi	80	DN300	304/316
FLASC 700	1000	150 psi	80	DN350	304/316
FLASC 800	1500	150 psi	80	DN450	304/316
FLASC 1000	2500	150 psi	80	DN550	304/316
FLASC 2000	3500	150 psi	80	DN650	304/316